TYAN FT48-B8812, Service Engineer'S Manual

Page: 44 / 153

http://www.tyan.com
44
Memory Installation Procedure
Unplug the power supply before adding or removing DIMM modules or
any other system components, Failure to do so may cause severe
damage to both the motherboard and the components.
1. Unlock a DIMM socket by Press the retaining clip outwardly in the following illustration.
2. Align the memory module with the socket, such that the DIMM NOTCH matches the KEY
SLOT on the socket.
3. Hold the DIMM by both of its ends. Insert the module vertically into the socket. Apply force
to both ends of the DIMM simultaneously until the retaining clip pop up into place. And the
DIMM cannot be pushed in any further to ensure proper sitting of the DIMM
。
KEY SLOT
Unlocked
retaining clip
Unlocked
retaining
clip
DIMM NOTCH