http://www.tyan.com
Removing a Hard Drive
!
CAUTION
:
Most repairs to the Tyan MicroServer should only be performed by a professional
service technician. Basic repairs and troubleshooting can be done if authorized in
the product documentation or if directed by telephone or online support from
Tyan. If damage has occurred due to repairs or service that is not approved by
Tyan, the product warranty becomes invalid. Review all safety guidelines that are
provided with the Tyan MicroServer.
Prerequisite:
Power down the system.
Disconnect all cables and peripherals from the compute blade(s).
Remove the compute blade. Refer to
Removing a Compute Blade.
1. Remove two (2) screws from the hard drive bracket. (Figure 4-7)
2. Slide and disconnect the hard drive bracket until the hard drive is disconnected from the
connector.
3. Lift and remove the hard drive bracket.
Hard
Drive
Bracket
Bracket Flange
Figure 4-7. Removing a Hard Drive Module
4. Remove four (4) screws from the hard drive bracket. (Figure 4-8)
5. Remove the hard drive bracket from the hard drive module.
Figure 4-8. Removing a Hard Drive Bracket
