TYAN B8251T83E8HR-2T-N, Service Engineer'S Manual

Page: 49 / 234

http://www.tyan.com
49
2.2 Rack Mounting
CAUTION: Please note that the following illustrations are based on a
TN83-B8251 barebone which may not look exactly like the rackmount
server you purchased. Therefore, the illustrations should be held for
your reference only.
After installing the necessary components, the TYAN TN83-B8251 can be mounted
in a rack using the supplied rack mounting kit.
2.2.1 Installing the Server in a Rack
Follow these instructions to mount the TYAN TN83-B8251 into an industry standard
19" rack.
NOTE : Before mounting the TYAN TN83-B8251 in a rack, ensure that all internal
components have been installed and that the unit has been fully tested. However, to
make the installation easier, we suggest that you remove all HDD trays before you
insert the chassis into the rack.
2.2.2 Installing the inner Rails to the Chassis
1. Press the locking tabs in a sequential order (1
 2) to release and detach the
inner rail from the sliding rail.
2. Align the inner sliding rail on one side of the server. Push the inner rail backward
to the rear panel direction to lock it in place. Secure with a screw.