TYAN B5103G12S2, Manual

Page: 48 / 87

48
http://www.TYAN.com
4.4 Setting the Configuration For FreeBSD
Press the corresponding button according to the number of times specified on the
following tables, and you will see the corresponding prompt.
NOTE: If you press the C (Cancel) button at any time to cancel the configuration, you
must go through the entry process for a particular setting again.
KEY PRESS PROMPT FUNCTION
Right arrow
Configure
Network Upon each succeeding press of the Right arrow, the
following prompt appears, allowing you to configure
the network:
NIC Choice (default is First NIC )
Enable DHCP (default is Yes )
IP Address
Netmask
Gateway
DNS Server
Using New Setting
Press S (Select) to accept.
Down arrow
once (1)
Restart Upon pressing the Right arrow, the following prompt
appears, allowing you to restart the system:
Restart?
Press S (Select) to restart the system.
Down arrow
twice (2)
Shut Down Upon pressing the Right arrow, the following prompt
appears, allowing you to shutdown the system:
Shutdown?
Press S (Select) to shutdown the system.
Down arrow
three (3) times
Reset Admin
Password Upon pressing the Right arrow, the following prompt
appears, allowing you to reset the root password:
Reset Password?
Press S (Select) to reset the password.
NOTE
: The default root password is
password
.
Down arrow
four (4) times
Enable SSH
Access Upon pressing the Right arrow, the following prompt
appears, allowing you to enable SSH access:
SSH Access On?
Press S (Select) to enable SSH access.