4
Care and Maintenance
Pre-Assembly
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
PLANNING ASSEMBLY
Though its powder-coated finish is rust-resistant, steel is prone to rust over time with
exposure to the elements. In case of rust or scratches, lightly sand the affected area
and apply touch-up paint. To maintain the finish periodically apply wax with a soft cloth.
Tabletop ceramic tiles must be stored during fall and winter months in a dry location
where temperatures will not fall below 32°F (0°C).
OBSERVE WEIGHT LIMITS
The recommended weight limits for the following products are listed below:
Rocker: 225 lbs
CAUTION:
If you overload your
furniture, injuries can occur.
Table: 50 lbs
HARDWARE INCLUDED
NOTED:
Hardware not shown
to actual size.
Hi (1 spare)
Thicker Tile Bumper
Ha (1)
Short Bolt
Hb (4)
Long Bolt
Hk (1)
Assembly
Instructions Sheet
Hh (1)
Hex Wrench
Hc (4)
M8 Metal Washer
Hd (4)
M8 Locker
He (4)
M8 Nut
Hf (1)
Allen Wrench
Hg (1)
Open Hex Wrench
Hj (1 spare)
Thinner Tile Bumper
Wash frames and cushions with a mild solution of soap and water; rinse thoroughly.
Dry completely and drip-dry cushions. Do not use bleach or solvents.