These instructions should be read in full before the RF amplifier is
operated.
The safety and operating instructions should be retained for future
reference.
All warnings on the RF amplifier and in the operating instructions
should be adhered to.
All operation and user instructions should be followed.
Use of this device into a radiating antenna requires a valid licence from
a Spectrum Management Authority in most countries.
Use of this device as part of a transmission system, or combined
transmission system not specified by the manufacturer, may require
further testing to ensure that it remains compliant with the essential
requirements and other relevant provisions of current EU Low Voltage,
EMC and Radio Equipment Directives. Approval and clearance from the
Spectrum Management Authority may also be required.
Installation must adhere to safety regulations and the requirements of
the relevant authorities. We recommend that at least two people are
present during installation. Keep a file containing installation
instructions and plans, including details of the transmission system
(antennas, feeders, filters, etc) and operating instructions for all
equipment at the transmission site at all times. Display posters
detailing first aid treatment and treatment for electrical shock, along
with telephone numbers for contacting the emergency services in the
event of personal injury.
Ensure antenna system lightning strike protection is in place.
To reduce the risk of electrical shock, do not remove the cover, or any
screws. There are no user serviceable parts inside; refer servicing to
qualified personnel.
Do not expose this appliance to rain or moisture. The RF amplifier
should not be used near water. Care should be taken so that objects
do not fall - and liquids are not spilled - into the enclosure through
openings.
Before operating
