1. Front and Rear Panels…
1. PSU RETAINING CLIP Push to the right in order to release the PSU,
then pull forward gently, using the handle.
2. MULTI-FUNCTION KEYS Push-button controls for UP, DOWN, LEFT,
RIGHT and OK. For navigation of the LCD menu.
3. RF MON BNC RF monitoring point. Provides a sample of the output
RF at approximately -40dB. Do not use for measuring compliance.
4. PSU DC OK This LED indicates that the Power Amplifier Supply (48V
DC) is working.
5. PSU AC OK This LED indicates that the AC mains power is connected.
6. SYSTEM. If this LED is green, all system parameters are operating
correctly. If it is red, the transmitter needs urgent attention.
7. FWD If this LED is green, the forward RF power is operating. If this
LED is red, the RF power is not present. This may be intentional, due to
user settings, or it may be due to a fault with the connected antenna
system.
Controls and Connectors
