E m a i l :i n fo @ t ri a n g u l a r wave.com • Tri [email protected] • We b s i t e :w w w. Tri a n g u l a r wave. c o m
3
Installation of the PVC “T-Housing” is site specific.
For best results, the Triangular Wave IonGuard
Purification System should be installed downstream
of the pump, the filter, and the Triangular Wave
Deposit Control System.
The connecting piping should include isolation valves
upstream and downstream of the PVC “T-Housing” to
facilitate replacement of the Copper/Silver
Electrodes.
SYSTEM INSTALLATION OVERVIEW
SECTION 4
INSTALLATION
Continue section 3
Figure 1:IonGuard Purification System
Conduit / Electrode
Wire Assembly
AC Power Cord
Triangular Wave
Deposit Control System
( Recommended )
Power Supply
Electronic Control Unit
T-Housing
Electrodes
*Isolation Valve
*Isolation Valve
*Not included:See section 3 regarding installation
TWT Deposit Control
System
( Recommended )
TWT IonGuard
Purification System
TWT IonGuard T-Housing
TWT Deposit Control
Reaction Chamber
( Recommended )
Water Flow
PUMP
FILTER
HEATER
Pumps, piping, fittings, valves,and other material needed to and from system owners responsibility
The Ionization Purification System should
only operate when water is flowing through
the recirculating pipes; that is, when the
pump is opera t i n g . Two options are ava i l a bl e
to insure the Ionization System and the
pump operate together.
•
The AC power cord may be wired across
the pumps power supply; or
• The AC power cord may be plugged into
a 110 /220 VAC outlet, and the “standby”
feature may be connected to
a flow switch or a timer switch.
