Twsit av stand Product Set Up Instructions Download Page 5

Page: 5 / 6

Twist AV Stand Setup Instructions

Continue to build the TWIST stand; making sure that

the TWIST upright sits behind the AV crossbeam.

Once you have attached the brackets provided to the

TV/Monitor screen, manoeuvre the screen into position

so that the two brackets sit on top of the crossbeam.

Once the screen is in position, further alterations can

be made for cables if required. Then hook the graphic

to the base.

WARNING:

Please check the TV vesa mounting holes

for compatability.

Vesa mounting holes:

AV 200:

100mm x 100mm

200mm x 200mm

AV 400:

400mm x 200mm

400mm x 400mm

Then hang the graphic.

But dont hook the bottom of the graphic until

the screen has been positioned on the AV Stand.

Summary of Contents for av stand






