Single Earbud Mode:
When the main earbud (R) and the secondary earbud
(L) are not connected, take out one of them separately from the charging case. The
earbud prompts “turn on”, then the blue light flashes for 3 seconds. When the red
and blue lights flash alternately, pair with your device via Bluetooth, and the earbud
will prompt “Connected”.
Special Note:
The earbuds are paired before packaging, but you can pair
them manually if needed by following the next steps: Power off the earbuds, then
press the button on both earbuds at the same time and do not release for about 10s.
The blue light will light up, and after that red and blue light will sparkle alternatively.
Release the buttons and the earbuds are now paired, and ready for use.
