1.8m
Clearance
50-60cm
3.0m
Load bearing beam
5
HOW TO HANG
YOUR HAMMOCK
TEMPORARY INSTALLATIONS
For temporary installations, such as trees or beams, we recommend using the Two Trees
hammock hanging kit (TT501HK). For more information about our installation products please
visit our website (www.twotreeshammocks.com.au)
Place the cord around the pole
or tree, then thread through the
figure eight hook.
Thread the cord through the
clamp hook and secure at
desired length.
Repeat process for other
side of hammock. Ensure
both hooks are secure, place
hammock ends over hooks.
1
2
3
Should you not want to use your included stand and would like
to hang from a tree or structural beam, follow the below guide.
To hang your Two Trees hammock you will require one fixed
point, such as a tree or structural beam. Consult a qualified
builder if unsure.
WARNING:
Never attach hammock directly to a
ceiling or roof covering.
Your Two Trees hammock will require a sturdy fixing point.
Rope or metal chain may be needed to attach to the fixing point
if the hammock is to high off the ground. It is recommended to
use a double piece to avoid the hammock twisting. Consult a qualified builder is unsure.
Hang the hammock using the fixing loop. As a guide when the hammock is in use it should sit
50-60cm above the ground so your feet can touch the ground.
Summary of Contents for TT601CK
Page 10: ...10 NOTES...
Page 11: ...11 NOTES...
