Vertical Broiler User Manual
4
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 |
WWW.TWOTHOUSANDCO.COM
it had been used for other purposes that are not included in this manual and cause
damage to the appliance, the manufacturer is not responsible for this. The following
situations are not covered in the warranty:
――
Improbably used for purposes other than that is designed;
――
Wrong installation or improbably maintained;
――
Leave the appliance on when some parts are broken;
――
Replace the spare parts without the written permission by the agent;
――
Damaged by force majeure.
5. Installation
5.1 Spare Parts
Serial No.
Name
Quantity
Remark
1
Meat shovel
1
2
Meat fork
1
5.2 Electrical parts installation
a. Make sure the supplied voltage matches the rating voltage on the naming plate. The power is
220V/60HZ. And the appliance should be grounded safely;
b. The air switch for the power cord should be above 25A;
c. Connect the live and neutral lines in a correct method;
d. Make sure that the appliance is grounded safely. For convenient operation, never pile up the
sundry goods near the switch.
6. Operation
6.1
Bunch the meat or chicken that need to be broiled around the meat fork. Put the meat fork back
into the axle base, then insert the top tip of the meat fork into the top fixed tube. Adjust the
position of the top mobile case. Lock it well after it has been OK;
6.2
Turn the switch at the lower part on. The meat fork will gyrate with the meat;
6.3
Turn the switch at the right side of the heating elements. The broiling begins;
6.4
As the broiling proceeds, use the knife to cut down the broiled meat at the surface. Put the meat
into the meat shovel. Then move the burners forward.
7. Transportation and storage
In the process of transportation, the appliance should be handled carefully, preventing the intense
shaking. The packaged appliance should be stored in a well-ventilated area free of caustic air. It
cannot be placed in the outside area and should never be put upside down. Keep it dry and dust-free.
Do not expose it to direct sunlight. Avoid mechanical shocks and vibrations. If it is for temporary
storage, the weather-proof method should be taken.
8. Cleaning and maintenance
8.1
Cut the power off, and turn the main gas valve off when cleaning is carried out. Leave it until
it cools down completely to avoid accidents from happening;
8.2 Use the wet cloth dampened by non-corrosive detergent solution to clean the appliance after
