Water Boiler User Manual
the water temperature is, the stronger the water sprays out, after about thirty five minutes, the water
temperature will have 97 degree and the auto-thermostat will stop working, it means that the big
heating element will also stop cooking, the small heating element will automatically begin to work
for keeping long time warm and the coffee water will be ready.
g. When about three cups of water remaining in the tank, turn the switch off and unplug the cord
from the electric outlet.
THERMAL CUT-OUT
The appliance must be unplugged before it can be reset. The appliance is fitted with a thermal
cut-out. If this is activated, the appliance will turn itself off, although the lamp will remain on. In
order to make the appliance operational again, the reset button of the appliance must be pressed
once the appliance has cooled down. If the appliance still does not work, you should contact your
dealer. This safety device may have been switched off during transport. If so, follow the above
instructions.
HEATING WATER FOR INSTANT BEVERAGES
a. Plain water may be heated in your appliance for use with instant beverages. Simply fill the clean
appliance with cold water to the desire cup level and place percolator tube and filter basket into
position. Plug appliance in and switch to on position. Switch off the appliance and unplug it when
less than three cups of water remain.
b. When the appliance is used to heat water only, it must be thoroughly clean well after using. In
addition to special weekly cleaning using vinegar to move mineral deposits, if these deposits are not
removed, pitting off themetal can occur and result in damage to the appliance.
CLEANING AFTER USE.
a. Clean the filter basket and top cover with a non-abrasive detergent and then dry them off with a
soft dry cloth. The inside of the tank and the percolator tube are made of stainless-steel and can be
cleaned with a scouring agent, possibly in combination with souring pad.
b. If the appliance is to function properly, the cavity in the middle of the base must be free of lime
scale. Use a scale remover if necessary.
c. To clean faucet, move a brush up and down through the faucet, then insert brush through
opening inside the appliance to clean faucet connection. Wash faucet handle in hot soapy water and
rinse. Replace faucet
d. Don’t use baking soda to clean to appliance as it can discolor and pit the metal.
HOW TO DEAL WITH WHEN THE PLUG DOESN’T WORK
It’s advised to use the special & professional soft plug or replace and repair it in your local
maintenance department confirmed by the factory.
THE ELECTRIC CIRCUIT DIAGRAM
3
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 |
WWW.TWOTHOUSANDCO.COM
