TT Series Ice Maker User Manual
TT-I74K 220V-240V 1500W 50Hz-60Hz 700Kg/24h 350Kg R134/404a
1800g
3.
Working conditions
Minimum Maximum
Environmental temperature 10
℃
40
℃
Water temperature 5
℃
40
℃
Water pressure 1 bar (0.1 MPa) 5bar (0.5MPa)
Rated voltage difference 220V
+
10%
4. Installation
(1) The location for the machine should be equipped with the following devices:
a. power of 220V/50Hz-60Hz
b. water resource and switch
c. pipeline for water drainage
(2) The machine should be put in level to keep the ice producing effort and prevent from the
vibration.
(3) The machine has to be put in the good ventilation location; it should keep away 150mm from the
other objects for the air exchange. The machine should be kept away from other heating resources,
such as heaters and ovens etc. The machine should be equipped with suitable power switch, fuse
and breaker (model: DZ12L-60G/1N, the rated breaking current is 15mA, the non- breaking current
is 7.5mA). The current volume for the socket and cable is not less than 10A. The socket must have
qualified earthling wire.
(4) If the water quality is not so good, you should connect a filter to the tap. The water quality for
the ice producing should meet the drinking standards.
5. Transportation and storage
In transportation, it should be very careful, prevention from heavy vibration. The machine in package
cannot be put in open-air for long time. It should be put in the good facility of air and non-corrosive
air storage. It cannot be put upside-down. If it is necessary to put it in open-air, it should have
waterproof facilities.
6. Operation
(1)
The appliance is equipped with temperature and time control system. The process is
completed automatically from water in to ice out. It is no needing man power, so it is simple and
convenient in operation. What you have to do is only turning on the power and water.
(2)
During the operation, when the cabinet is full of ice cubes, the machine will stop
automatically. You should take out some of ice cubes and the machine will start again.
(3)
You should connect water pipe for the machine. The water pressure should be between
0.1-0.5MPa. The flow can be adjusted by the tap and it depends on the drainage volume of
frost-melting. If the drainage is big, turn up the tap, if the drainage is small, turn down the tap.
(4)
The silicon balls inside the machine are for prevention of the internal bottom from striking
of the ice falling down. So, the silicon balls have to be put in the operation and taken out for cleaning
regularly.
7. Maintenance and cleaning
(5)
Before maintenance or cleaning, you must turn off the power and water.
(6)
Keep clean for the machine and clean it regularly. You can clean it with non corrosive
detergent first and dry it with cleaner. It is forbidden to water it directly or cleaning it with acid, alkali,
alcohol, or gasoline.
(7)
Taking off the curtain first and clean the refrigerator with duster, brush and metal brush.
But be careful for the radiators.
3
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 |
WWW.TWOTHOUSANDCO.COM
