Dough Sheeter User Manual
OPERATION
A: Roller(Active X2,Passive X2)
I:Power switch
B:Table(Small X2.Big X2)
J:Start Level
C:Upper Machine Body
K:Conveyor Adjusting Nut:4pcs
D:Flour Tray
E:Upper pressing Roller ,Upper scraper X2
Lower pressing Roller ,Upper scraper X2
F:Safety Guard:Left&Right
G:Conveyor:2pcs.
H:Thickness Handle
2.1 OPERATION
1. When using machine, set up the thickness handle ( H ) to the most left position.
2. Note : do not put hands into safety guard.
3. Switch off power when cleaning.
4. Lift up safety guards ( F ) after operation and then turn off power switch (I ).
2.2 SAFETY GUARDS
All the safety devices must be checked before operation .Maintenance should be made immediately
when defects or malfunction found.
1. Check the warning sings on the machine.
2. Clean up the water, oil and resin on the machine and its foundation immediately. it avoid slide
and injury.
3. Keep your body away from any moving part of the machine.
4. Beware of foreign objects fall into the machine while operating.
5. Do not climb onto the machine while it is running.
6. In case any fault occurs in the process of operation, press Emergency Stop button.
3
NO.18 - 105, HUAGANG GARDEN, ZHONGSHAN AVENUE, GUANGZHOU, CHINA
T: 86-20-38768241 | F: 86-20-38769376 |
