Two-Rock Matt Schofield 50 Signature, Owner'S Manual

Page: 5 / 9

7.
Effects Return
- Use this jack to connect the output of your effects to the amplifier.
8.
Traditional / Modern - This switch affects the internal negative feedback circuit located in the
preamp section.
The effect is subtle and becomes more apparent as you familiarize yourself with various settings.
“The
Modern settings is our standard Two-rock negative feedback circuit, it is most effective when
using high output humbucking or active pickups. This setting will also smooth out the drive of the
signal as it passes through the stage onto the rest of the amplifier. The
Traditional setting
completely takes the negative feedback out of the input stage. Guitars with single coil or low
wound pickups will have more punch with this setting. The setting will cause more drive to be
present in the signal. We suggest you experiment with the settings of both. You can change the
d
egree of articulation, compression, and “bloom” characteristics of the amp with these features.
Fuse Chart
All Fuses are 3AG Type 250 Volt, SLO-BLO
Export 100 Volt Domestic Fuses: Export 220, 230, 240 Fuses:
2A
– 22/35 Watt 2A – 22/35 Watt 1A-22/35 Watt
2.5 - 50 Watt 2.5 - 50 Watt 1.6 - 50 Watt
3.2 - 100 Watt 3.2 - 100 Watt 2.5 - 100 Watt
FOOTSWITCH
Boost - Blue LED
Tremolo - Red LED