Two Notes TORPEDO C.A.B., User Manual

Page: 22 / 36

Configuring and using the TORPEDO C.A.B.
Module Parameter
Value
Power Amp
On or Off
Model
8 models, from SE 6L6 to PP KT88
Volume
0 to 30dB
Presence
If Model PP: 0 to 100%
Depth
0 to 100%
Type
Triode or Pentode
Miking
On or Off
Bank
Cab/mic, User 0 to User 3 (in User bank, the options Mic, Dis-
tance, Center and Position are not available). 32 memory
slots for Cab/mic, 128 per User bank
Cab or File
Cabinet name or IR file name
Mic
Microphone name
Distance
0 to 100% (i.e. 0 to 10 feet/3 meters)
Center
0 to 100% (i.e. 0 to cabinet side, length depending on the
real cabinet geometry)
Position
Back or Front
EQ
On or Off
Mode
Guitar or Bass
120Hz (Guitar) or 50Hz (Bass)
-20dB to +20dB
360Hz/120Hz
-20dB to +20dB
800Hz/360Hz
-20dB to +20dB
2KHz/800Hz
-20dB to +20dB
6KHz/4KHz
-20dB to +20dB
Level
-95 to 0dB
6.1 Power Amp
When using the TORPEDO C.A.B. with any kind of guitar/bass preamplifier, or even an electric
piano or a synthesizer, you need the color brought by the final stage of a traditional amplifier: the
power amplifier. Plug your device into the Input of the TORPEDO C.A.B. and enjoy the typical sound
of the Two Notes electrically accurate virtual tube power amplifier:
•
Power Amp On
: Activate the power amplifier simulation by turning this parameter "On" .
• Model : Choose the amplifier topology (Push Pull or Single Ended) and the tube type (6L6, EL34,
EL84 or KT88).
• Volume : Set up the Output volume of your virtual power amplifier.
• Presence : This setting affects the tube stage frequency (loudness).
• Depth : this setting affects the tube-stage frequency (bandwidth).
• Pentode/Triode : Select how the tube is used, either in triode or in pentode mode. Pentode
mode has more headroom and volume than triode.
22 Two Notes Audio Engineering TORPEDO C.A.B.