12. Install rubber lined muffler clamp over canister.
13. Install the TBR muffler assembly and attach using
the flange bolt and nut to secure the muffler in
place.
14. Check alignment and tighten muffler and the
4 6x14mm V.A.L.E.™ socket head cap screws.
15. Tighten OEM joint clamp.
16. Install TBR fender eliminator kit using the original
bolts and supplied nuts, the nuts will be inside
the bike under seat.
17. Attach turn signals and plate light bolts using the
wire splice connectors supplied to the correct
wires in the harness as shown in the Wiring
Diagram.
18. Re-install seats and covers.
Installation Instructions
Warranty
Two Brothers Racing products are intended for closed course competition purposes only, and therefore are sold “as is”
without warranty. Two Brothers Racing specifically disclaims any warranties of merchantability or fitness for a particular
purpose and disclaims all responsibility for consequential and incidental damages or any other losses arising from the use
of these products or parts.
WIRING DIAGRAM
Left
Turn
Signal
(Grey
connector)
Red
Plate Lights
Right
Turn
Signal
(Black
connector)
Wiring
Harness
Black/Yellow
Red
Black
Black Red
Kawasaki
ZX-6R
V.A.L.E.™ Slip-on Exhaust System with M-2 Canister
Part # 005-32804xV
19. Remove OEM sleeves from OEM mount and OEM
mid-pipe mount.
20. Double check all your work.
21. Before you run the bike, clean off all fingerprints
and dirt, as any oily residue will etch the metal and
become somewhat permanent when the system
gets hot. Also, remove any plastic film from the
name badge(s) and or canister clamp(s). Run the
bike and enjoy. It is normal for some white smoke
to appear the first time you start the bike. This is
packing/manufacturing oil from inside the pipe
burning off. Check for gaps or leaks. If you find
a leak, a little high temperature silicon sealant
should fix it. After 50 to 100 miles, recheck all
fasteners for tightness.
Parts List
1
Muffler Canister
Varies
1
Muffler Clamp
Varies
1
Slip-on Tube
005-24104S
1
HARDWARE KIT
005-328-3
1
X-Ring Kit
005-7-2-3KIT
1
Fender Bracket
005-19904B
2
Lighted License Plate Bolt
005-8504LTZ
1
Turn Signals (set of 2)
005-88T2
6
Butt Splice Connectors
005-BS1614
1
Zip Tie
005-ZT458B
1
Zip Tie Tab
005-ZTM4
1
Muffler Bracket
005-328-B
2
8x40mm Socket Head Cap Screw 005-SH840
4
6mm Flange Nut
005-FN6
1
8x16mm Flange Bolt
005-FB816
3
8mm Flange Nut
005-FN8
1
TBR Sticker Kit
015-10212
