www.twistyride.com
7
Once the cable is positioned correctly, it is time to connect
the battery connectors to the battery terminals. The steps
below must be followed in order:
1. Disconnect the negative terminal (black / -) of the
battery first. The negative terminal is the main
power link, so disconnecting it cuts off power to the
motorcycle. The positive terminal is usually red, so
disconnect the other one. To disconnect the
terminal, unscrew the bolt on it until the battery
cable can be removed and securely tucked away.
2. Disconnect the positive terminal (red / +) of the
battery.
3. Insert the red battery connector on the positive
terminal of the battery and screw the bolt back in
position. This will pinch both the original battery
cable and the charger cable. This means the
positive terminal is now connected.
4. Insert the black battery connector on the negative
terminal in a similar fashion. The motorcycle is now
operational again.
5. Verify that the LED indicator on the power
converter can be turned on and off by pressing the
on / off button.
6. Keep the charger turned off when not in use as it
would otherwise drain the battery.
