SET UP
1. Select a level area for set up.
2. Remove the transportation chains from around the arms. Drop the
Bottom Canvas Arm into the horizontal position. Remove the pin se-
curing the Top Canvas Arm from its (vertical) transportation position
and put in into its horizontal position, securing it with the pin. (See
Figure 2.)
4. Slide the canvas onto the top and bottom canvas arms. (See Figure 3.)
5. Extend top canvas bar to full height, and use the ball
bungees to secure canvas to the vertical bar. (See Figure
4.)
6. Place the arm into the trigger mechanism. Put the oth-
er end trough the hole in the canvas. Make sure the arm
drops into the tube on the side of the frame. Insert the
target into the end of the arm, and screw tight.
7. Place one hand on the front of the seat and push
down. With the other hand test the target to see that it
works properly.
8. Check drain plug to make sure it is tight and then fill tank to the top with water (approx. 500 gal-
lons).
9. REVIEW SAFETY RULES WITH ALL PARTICIPANTS.
Figure 2
Figure 3
Figure 4
Summary of Contents for ECONODUNKER
Page 1: ......
