5v supply setting
Cells re5V DC power to operate, as well as +/- 12V . On-board 12V to 5V
conversion is provided if 5V isn’t available in your system. This is configured via a
jumper on the rear of the module:
In this setup, no external 5v supply is required Cells will
provide 5V from the 12V rail (22mA draw).
In this setup the module requires a 5V supply, but will now
only draw 4mA from the 12v rail
Please refer to the Eurorack (Doepfer style) pinout:
Eurorack Power Connector Pinout 16-Pin
.
