MODEL: TWINTAB – T714
1
1.
Before use:
1.1
Interface with key knowledge
1.2 Use brief
1.2.1 Key Open the key: In the shutdown mode, short press to perform power operation; in
the boot mode, short press to enter sleep mode devices; long shutdown button to enter the
selection screen, choose Shut Down. Menu key: key pop-up menu of the program in the
current interface. Home key: Short press to return to the desktop, press the program switch
to switch the pop-up interface. Return key: key to return to the previous screen after screen,
repeatedly press the return key, you can exit the program returns to the main interface.
1.2.2 Battery Equipment built-in 3000mAh Rechargeable battery, the charge should pay
attention to the following matters: (1) This machine charging voltage of 5.0V, make sure
before use, so as not to damage the device and may have other risk; (2) If the battery is too
low, the device will automatically shut down to recharge the battery, the device is turned on
or off state, can be charged;
3 charging device is turned on, the taskbar battery icon shows charging mode; 4 charging,
such as blue light on the device, the battery is charging; When the lamp is not lit, the battery
is already full;
5 After charging unplug the plug and unplug the charger from the power outlet; charging
time: the off state, using the standard charger takes almost 2 hours. If the power state of
charge, due to the synchronization power consumption, takes a long time to charge the
battery. Use of time: 3-4 hours of continuous use (use of time by using the specific features
and equipment settings).
1.2.3 T-Flash card Native support for 32GB and below T-Flash card, as some applications
need to support T-Flash card, the proposed configuration a T-Flash card. Tip: T-Flash card to
access the files, do not pull the card to avoid damage to the T-Flash card, to remove the
T-FLASH card please in "Settings / / store" will click on "Uninstall TF card."
1.2.4 Connect computer
USB connection can be manipulated through T-FLASH card, built-in Flash files, such as
adding, deleting, and so on. 1, the device via USB cable to the PC
2, top left corner, sliding function keys, select "USB Connection" and select "Open the USB
storage device."
3, press the "Open the USB storage device", you can load the T-Flash card and built-in Flash
to a PC, can be loaded after the same operation as the operation U disk T-FLASH card or
built-in Flash files, but also You can copy files to the T-FLASH card or built-in Flash.
4, the operation is complete, press the "Turn off USB storage device" disconnected from the
PC.