Booming B Series Wireless AP
TwinMOS
Page 15
Wireless--Basic Settings Page
This page is used to configure the parameters for wireless LAN clients, which may connect to your
Access Point. Here you may change wireless encryption settings as well as wireless network parameters.
l
Disable Wireless LAN Interface
When the setting is checked, the RF signal of the device will be disabled.
l
SSID
The name of the wireless network: This name cannot be longer than 32 characters. The default value is
“B-AP-12.
l
Channel Number
A transmission channel for wireless communications: The channel of any wireless device must match
the channel selected here in order for the wireless device to access the LAN via the AP.
l
Associated Clients
Click “Show Active Clients” button to launch the Active Wireless Client Table. This table shows the
MAC address, transmission, receipt packet counters and encrypted status for each associated wireless
client.
l
Apply Changes
Click “Apply” button to save and implement the new settings.
l
Reset
Click “Reset” button to reload default settings.
