N
N
N
L
L
M
M
H
Completed
Front
Assembly
Left
Curved
Panel
Hearth/Base
A
I
Right
Curved
Panel
4. Locate the Left Curved Panel (H), line up
the holes in the mounting blocks on the
panel with the holes on the Left Front
Panel (B). Insert a Bolt (L) and Washer
(M) into the holes in the mounting
blocks. HAND TIGHEN ONLY.
5. Locate the Right Curved Panel (I), line
up the holes in the mounting blocks on
the panel with the holes on the Right
Front Panel (C). Insert a Bolt (L) and
Washer (M) into the holes in the
mounting blocks. HAND TIGHEN
ONLY.
6. Locate Hearth./Base (A) and set out
finished side up to the floor.
7. Place a drop of Wood Glue (O) into each
of the pre-drilled holes on the edges of
the completed Front Panel Assembly
from Step 5 Then insert one Wood
Dowel (N) into each of the pre-drilled
holes. Attach the completed Front Panel
Assembly to Hearth/Base. Insert a Bolt
(L) and Washer (M) into the pre-drilled
holes in the mounting blocks. HAND
TIGHTEN ONLY.
8. Locate Left Side Panel (E), and place a
drop of Wood Glue (O) into each of the
pre-drilled holes on the edges of the
panel. Then insert one Wood Dowel (N)
into each of the pre-drilled holes. Attach
the Left Side Panel (E) to the completed
Front Panel Assembly and Hearth/Base
(A). Make sure the dowel seat into the
holes in the pre-drilled holes in the
Hearth/Base (A). Insert a Bolt (L) and
Washer (M) into the pre-drilled holes in
the holes in the mounting blocks. HAND
TIGHEN ONLY
9. Locate Right Side Panel (F), and place
a drop of Wood Glue (O) into each of
the pre-drilled holes on the edges of
the panel. Then insert one Wood
Dowel (N) into each of the pre-
drilled holes. Attach the Right Side
Panel to the completed Front Panel
Assembly and Hearth/Base (A). Make
sure the dowels seat into the holes in
the pre-drilled holes on the
Hearth/Base.(A). Insert a Bolt (L) and
Washer (M) into the pre-drilled holes
in the mounting blocks. HAND
TIGHTEN ONLY.
N
L
L
M
M
E
F
Completed
Front
Assembly
Left
Side
Panel
Right
Side
Panel
Hearth/Base
A
E-3
