E-3
3. Locate Hearth/Base (A) and set out f nished
side up on the f ooor.
4. Insert one wood dowel (N) into each of the
pre-drilled holes.
5. Attach the completed assembly from step 2 to
the hearth/Base (A). Make sure that dowels are
seated into the pre-drilled holes in the
hearth/Base. Using Bolts (L) and washers (M)
attach panels through pre-drilled holes in the
mounting blocks.
HAND
TIGHTEN
ONLY.
L
M
N
N
N
N
N
A
Hearth/Base
2. Locate Center Left Side Panel (B) and Center
Right Side Panel (C) from step 1, Center Front
Panel (D) and set out on a scratch free surface.
Insert one Wood Dowel (N) into each of the
pre-drilled holes. Push Center Left Side Panel
(B) and Right Side Panel (C) snug to Center
Front Panel(D). Make sure the Wood Dowel
are seated in the pre-drilled holes.
D
Center Front
Panel
N
N
B
C
