6
Hardware Used
FF
Knob (with bolt)
x 8
FF
B
C
Fig. 5
Fig. 6
Fig. 7
Hardware Used
Hardware Used
GG
Cap (with bolt)
Shelf Pin
x 2
x 8
J
I
K
L
GG
7. screw the Cap (QQ) through the connect blocks (I, J)
to install the Towel Rack (K).
6. Choose desired height of exterior side wood shelves
(L) and place the Shelf Pins (GG) into same height
shelf holes inside side panels. Insert the exterior
side Wood Shelf (L), allow exterior side Wood Shelf
(L) to rest on the Shelf Pin (GG).
LL
LL
Screw
x 32
5. Locate Right Doors (C) and Left Doors (B),
attach the hinge another part to the side panels with
screws (Diagram 1). Slide door hinge keyhole into
panel hinge bracket. Use Phillips Head Screwdriver
to tighten screws. (Diagram 2)
TO
ADJUST
HINGES
To adjust door forward or backward change
keyhole slot position. (As Shown In Diagram 2a)
To adjust door right or left loosen/tighten screw.
(As Shown In Diagram 2b)
To adjust door up or down adjust bracket height.
(As Shown In Diagram 2c)
Attach the Knob (FF) to the Left Doors (B) and Right
Doors (C) and upper drawers, use the bolts attached
through the pre-drilled holes in the doors. Then use
a Phillips Head Screwdriver to tighten the bolts.
1
2
