8
Note:
please switch to the English input method when you input a command by smart phone;
tracker will only accept commands from a user with the correct password. Command will be
ignored if with wrong password.
######: new password, the range of 6 digits.
Example:
$SMS,000000;W001,123456;!
6.
Authorized number
6.1
Set the authorized number by SMS
SMS Command:
$SMS,000000;W010,NO.,Phone Number,ABC;!
Description: Set authorized phone number and its related functions
Explain:
NO.: authorized number’s serial number, range of: 1~3
Phone Number: authorized number, range of: 0~19 characters
A: range of: 0~1; when the parameter ‘A’ is 0, it means disable Geo-fence alarm, otherwise it
means enable Geo-fence alarm. Default is 0
B: range of: 0~1; when the parameter ‘B’ is 0, it means disable monitoring function,
otherwise it means enable monitoring function. Default is 0
C: range of: 0~1; when the parameter ‘C’ is 0, it means disable SOS emergency calling
function, otherwise it means enable SOS emergency calling function. Default is 0
For example:
Set the 1st authorized number is 13800000000 and enable monitoring function.
$SMS,000000;W010,1,13800000000,010;!
6.2
Easy authorized phone no. setup by calling
Tracker only supports three authorized numbers; we can set the authorized number by phone
call if there are not set authorized number fully (this function only supports to set the
authorized number, not included its related functions).
Set as follows:
Any non-authorized number calls to the tracker over than 10 seconds, the tracker will hang up
the line automatically and the yellow light will blink for 30 seconds. During these 30 seconds,
press SOS button
less than 3 seconds, and then successfully set this call-in number as a new
authorized number and send an SMS to this number to inform the setting is OK.
