11 | www.twineaglesgrills.com
BAFFLE FILTER
INSTALLATION, USE AND CARE
INSTALLER:
Please leave these installation instructions with unit for the owner.
1. Remove all packaging and the productive plastic covering from filters.
2. Grasp the filter by the center baffle, see FIG 11, with the spring end facing you and the grease collector
channel is facing down and toward the rear of the hood. Position the spring end of the filter into the up-
per channel of the front escutcheon, compress the spring by pulling the filter toward you and rotate the
rear of the filter up and into the rear retaining recess formed by the rear escutcheon and retaining clip.
Release the filter, being sure it is positioned properly in the channels. You should be able to push and pull
down on the filter without having it come out of position. You can bend the spring lightly outward if the
filter is no pressing securely against the rear escutcheon.
3. The filter has an integral grease collector and is dishwasher safe. To clean your filter simply grasp the fil-
ter by its center baffle, pull toward the front of the hood and rotate the rear of the filter down and away
from the hood, see FIG 12.
4. For best dishwasher results, position the filters in the dishwasher rack with the baffles positioned hori-
zontally.
BACKDRAFT DAMPER:
It is recommended that a backdraft damper in all installations. In cold weather installa-
tions it is necessary to use a backdraft damper to minimize backflow of cold air into the room. A non-metallic
thermal break should also be used to minimize conduction of outside temperatures through the ductwork.
The thermal break should be located as close as possible to where the ducting enter the heater portion of the
room.
FIG 11
1
2
3
WRONG
GREASE
COLLECTOR
CHANNEL
1. POSITION IN UPPER CHANNEL
2. PULL
3. ROTATE UP AND INTO RETAINING RECESS
FIG 12
1
2
3
1. PULL
2.
ROTATE DOWN
3. REMOVE FILTER