Emergency mode/Working. The device is through
with emergency calls, but sending messages,
message confirmation or position refresh is still
going on.
Emergency confirmation message received. After
receiving confirmation, the device will end
resending
of
an
emergency
message.
Simultaneously, the
message reception
tone
is played.
Post-emergency mode. The GSM operator´s name
is replaced by the emergency symbol. While this
notification is displayed, the device can be tracked
by emergency numbers, also emergency tone and
display settings are kept on. This mode can be
terminated manually, by pressing the
c
key.
NETWORK EMERGENCY CALL ( 112, 911, 000, 999, 08 etc)
Network emergency call query. Displayed when the
SOS key is pressed but making emergency cycle is
NOT possible (e.g. SIM card is missing or no
roaming network available). You may still try to
make network emergency call by pressing END
key. You can also exit the query without making an
emergency call by pressing END KEY
DISCREET EMERGENCY CYCLE (DISPLAY NOTIFICATIONS OFF)
During the discreet emergency cycle, the device
looks like it is in stand-by mode. The only indicator of
the ongoing emergency cycle is the emergency cycle
indicator appearing to symbol area. When the
symbol disappears or changes, cycle is over or
moved to post emergency mode. Also tones can be
turned off.
NOTIFICATIONS CONCERNING MANDOWN ALARMS
Pre-alarm for ManDown alarm is not set.
Displayed when "the cancel timer" is not
configured, and emergency cycle starts right
away. To mute the audible alert tone, press the
END key.
Pre-alarm for ManDown alarm is set. The
countdown timer shows that you still have 27
seconds time left to cancel the sensor alert if you
want.
To cancel the emergency cycle, lift the device to
vertical position. Do it while this notification is
displayed. To let the emergency cycle take
place: Do nothing. To mute the audible alert
tone, press END key.
Alert state ended. Displayed right after the
emergency cycle is finished, or the sensor alert
is cancelled.
Post-alarm
state.
Displayed
when
the
emergency cycle is completed, and the device
makes audible alarms at regular intervals. You
can receive phone calls and answer them by
pressing
SEND KEY
. In order to stop the post-
alarm tone, the device must be lift up to vertical
position.
BASIC KEY FUNCTIONS
TURNING THE DEVICE ON
1. Press END key and hold it down for a few seconds.
2. The logo is displayed.
TURNING THE DEVICE OFF
1. Press the END key and hold down for a few seconds.
2. The Power off symbol is displayed and tone is heard.
Note, powering off may be prevented by configuration.
ANSWERING INCOMING CALLS
Press the SEND key when the device alerts.
NOTE: The device may be configured to answer some/all incoming
calls automatically. It may even be, that all incoming calls are
blocked and you cannot receive calls.
DROPPING/ENDING/CANCELLING A CALL
Press the END key briefly.
MAKING AN INFORMATION CALL
Press the SEND key and hold it down for a few seconds. The
device will call to configured number.
SENDING POSITION REPORT
1. Press the SEND key and hold it down for a few seconds.
2. After sending the position report, the device may receive an
incoming information call - depending on service.
3. When the device starts alerting, answer the call by pressing the
SEND key.
NOTE: The device may also be configured to answer the call
automatically.
MAKING EMERGENCY CALLS AND SENDING
EMERGENCY
MESSAGES
(EMERGENCY
CYCLE)
Press the SOS key according to configuration (a long press or two
quick presses). The device will make emergency calls and send
emergency reports (emergency messages including position
information) according to configuration.
CANCELLING EMERGENCY CYCLE
During cancellation period you may hear the cancellation tone and
see timer showing time left for cancellation.
• To cancel the entire emergency cycle, press the END key briefly
during the cancellation period.
• When the emergency cycle has already started you may,
depending on configuration still cancel the rest of the calls and
messages: Press the END key and hold it down for several
seconds. After successful cancellation the device will return to
normal operation and switch back to normal tone and display
settings.
ENDING EMERGENCY MODE MANUALLY
The emergency mode must be terminated manually. This means,
the emergency tone settings are kept on and the emergency
numbers are permitted to track the device without further notice.
Emergency tones and tracking option are switched on from the
moment you start the emergency cycle (by pressing the SOS key)
until you end the emergency mode (by pressing the END key
briefly). Another alarm cycle is not possible before previous is
ended.
SOME
CIRCUMSTANCES
MAY
AFFECT
ON
EMERGENCY CYCLE AND MODE
• Being in a shadow area of the GSM network at the time of the event.
• Poor GPS* coverage during emergency cycle may cause the emergency
cycle completion to slow down.
• Busy telephone lines when connecting (voice) calls.
• Message transmission errors caused by the carrier of an SMS/GPRS,
i.e. the network operator.
SENSOR ALERTS
To cancel sensor alert and prevent emergency cycle from starting, change
the phone to allowed position (horizontal or vertical) or move it gently if it is
configured to detect only movement. Do it while the countdown timer is still
displayed. To let the emergency cycle take place: Do nothing. To
mute/unmute the audible alert tone, press the END key
.
INCOMING/OUTGOING MPTP MESSAGES
The device may send or receive some MPTP messages. In most cases,
messages are either remote configuration/activation messages, some
notifications, emergency reports or various types of position messages and
they work autonomously according to configuration.
• In most cases there are no display notifications.
• Message sending/reception tones are configurable (beep sound as a
default).
