USER INTERFACE
STRAP HOLE
DISPLAY
•GSM status
•GPS status
•Battery status
POWER ON/OFF
•Power on
•Power off press both
buttons
MICROPHONE
SIM HOLDER
SYSTEM CONNECTOR
For connecting
charger or data cable
to the device.
DISPLAY INDICATORS
DEVICE IN STAND-BY MODE
BATTERY
INDICATOR
TELEMATICS
FEATURES
INDICATORS
GSM
NETWORK
INDICATORS
GPS POSITIONING
INDICATORS
BATTERY STATUS
The water level indicates charge left in the battery.
The higher the level, the more charge is left.
During charging, the battery icon is changed to
indicate this event.
GSM / GPRS NETWORK STATUS
GSM is on
GPRS is used for telematics
GPRS is active for telematics
.GSM is roaming. Phone is using other than home
network. Call and position transmissions are charged
according to roaming agreements. Position
transmissions may have been blocked automatically.
Bars on top of the network status icon indicate the
strength of the GSM network. The more bars and the
taller the bars, the better the GSM network.
- Four bars - high network strength
- No bars - no network
GENERAL STAUS ICONS
Processing. An operation is in progress, please wait
Tracking is active to one or more destinations
GPS POSITIONING STATUS
GPS is active
GPS is sleeping
GPS is not available
Bars on top of the network status icon indicate the
accuracy of the last GPS position. The more bars
and the taller the bars, the better the accuracy. If the
position is older than 1 – minute the signal bars are
shown as wireframes
DISPLAY / TONE NOTIFICATIONS
GENERAL NOTIFICATIONS
Powering Off icon will be shown when power off
button press has been initiated. Keep pressing
to power off.
Power off has been disabled and unit can not be
turned off.
General failure. Shown when an operation fails.
E.g. if you try to make a call when there is no
number pre-configured in the device.
Simultaneously, the
Failure
tone is played.
SIM failure. Shown when there is no SIM card
inserted in the device, or if the PIN code was
rejected. Simultaneously, the
Failure
tone is
played.
BASIC KEY FUNCTIONS
TURNING THE DEVICE ON
1. Press ON button
and hold it down for a few seconds.
2. The logo is shown.
TURNING THE DEVICE OFF
1. Press both buttons simultaneously and hold it down for a few
seconds.
2. The Power off icon is shown.
Note, powering off may be prevented by configuration and icon will
indicate in the statusbar.
INCOMING/OUTGOING MPTP MESSAGES
The device may send or receive some MPTP messages. In most
cases messages are either remote configuration/activation messages,
some notifications, emergency reports or various types of position
messages and they work autonomously according to configuration. In
most cases there are no display notifications.
