IMPORTANT
!
KEEP FOR LATER REFERENCE
READ THESE INSTRUCTIONS CAREFULLY
First position , second position and last position of the bottom.
The bottom (1D) can be placed in a high position using the 4 metal supports (40D). Put
them in the therefor designated holes (1 or 2). Secure the bottom (1D) with the bolts (36A)
and nuts (5) onto the metal supports (40D). Make sure the identity sticker on the bottom
(1D) faces downwards. When the child is old enough to crawl or can pull up itself you
must
put the bottom (1D) in the lowest and last position. To do this, place the 4 metal
supports (40D) in the designated holes (3). Secure the bottom (1D) with the bolts (36A)
and nuts (5) onto the metal supports (40D).
General safety instructions
:
•
Maximum weight of the child for all bottom positions
: 15 KG
•
Warning:
Do not place the playpen close to an open fire or other heat source.
•
Warning:
Do
n'
t leave anything in the playpen that could endanger the child.
•
Warning:
Do
n'
t leave anything in the
playpen
that the child could use as a stair.
•
Warning:
Don't leave anything in the playpen that could cause suffocation or entanglement
of the child.
•
Make sure the identity sticker on the bottom (
1D
) faces downwards.
•
Check regularly that the bolts (36A) on the corners and the 4 nuts (5) of the adjustable
bottom are properly tightened.
Warning
:
never use more than 1 mattress in the playpen.
Recommendation for the maximum dimensions of the mattress
: l x
w
x h = 93 cm x 71 cm x
11
cm
and the recommended minimum dimensions of the mattress
: l x
w
= 90 cm x 68 cm.
The space between the mattress and the
bars
is not allowed to be more than
30mm.
The distance from the top of the mattress to the top of the bars must be at least 500 mm in
the lowest position and at least 200 mm in the highest position. Do not use a mattress
thicker than 120mm. Take this into account when you purchase a mattress.
The thickness
should be matched to these dimensions.
THIS PLAYPEN MEETS THE STANDARD
EN 12227:2010
•
•
•
When the child is old enough to crawl or can pull up itself you
must
install
the bottom (
1D
)
in
the lowest and last position.
•
Warning:
Do not use the playpen without the
bottom
.
•
The playpen may not be used if a part of the box is broken, bent or missing.
Maintenance instructions: The playpen is maintenance-free. Use a slightly damp cloth and
a mild detergent to clean the playpen.
GB
- PLAYPEN
LUUK
•
•
•
•
Warning: Never leave your child unsupervised.
•
When the child is able to climb out of the
playpen
, to prevent injury from falling, the
playpen
shall no longer be used for that child.
•
Accessories which are not approved by the manufacturer shall not be used.