U.S. Federal Communications Commission (FCC)
FCC ID: 2AFRQ-TWEEBOT
FCC Caution
Any changes or modification not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including
interference that may cause undesired operation.
FCC wants you to know
In the event of Tweebaa Inc. TweeBot equipment malfunction,
all repairs should be performed by or an authorized agent. It is
the responsibility of users requiring service to report the need
for service to Tweebaa Inc. or to one of our authorized agents.
If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the
equipment until the problem is resolved.
Service can be facilitated through our office at:
Tweebaa Inc.
3601 Hwy 7 East, HSBC Tower,
Suite 302,
Markham, Ontario, L3R 0M3,
Canada
Phone: 877-238-9898
COMPLIANCE
34
5
CHARGING
TweeBot has a built-in Li-ion battery (3.7V, 1.6A), so it can be
used without connecting to a power supply. To charge the
battery, follow these steps:
Connect the micro USB connector to the TweeBot DC
5V input.
Plug the USB full-size connector into the 12V accessory
car plug provided. (A common USB type AC charger
(DC 5V, 500mA) can be used as well.)
TweeBot can also be charged by plugging the USB
connector into a computer.
1.
3.
2.
When TweeBot is charging, the LED status indicator
will be RED. When fully charged, the RED status
indicator LED will go off.
From fully discharged battery to full charge will take
several hours.
A fully charged TweeBot will last for up to 20 hours of
use.
