16
Wearing Your Tweak
Tweak FOCUS+T Setup
17
Insert
tip
in your
ear canal.
ROCKER
SWITCH
PROGRAM
BUTTON
UPPER
PORTION
LOWER
PORTION
Wearing Your Tweak
Place the Tweak over your
ear. Grab the loose end of the
tubing and gently insert the
tip into the ear canal. If you’re
using the thin tube, position
the retaining lock in the bowl
of the ear. (Sound tube used
with earhook does not have a
retaining lock.)
Now place the amplifier behind your ear with the
tube (or earhook) wrapped over the top of your ear.
When properly inserted, the tubing will lay close to
the head around the front of the ear and into the
canal. You can check this by moving your finger
down the tubing, into the ear. Using a mirror at first
may be helpful to properly position Tweak.
If the loose end doesn’t stay in your ear, you may
need a different length thin tube. Additional
sizes are available at TweakHearing.com or by
calling 1-888-815-3240.
Tweak FOCUS+T Setup
Selecting Your Amplification Setting
With a fresh battery in your Tweak and while
wearing the device, you are ready to choose an
amplification setting.
Start out in a relatively quiet environment. The first
time you turn Tweak on, it will be at the lowest
amplification setting. How does it sound?
To try the next level of
amplification,
press and
release
the upper portion
of the rocker switch.
You will hear two beeps,
indicating you are now in
Amplification Setting 2.
How does it sound?
Press and release the upper
portion of the rocker switch again and you’ll hear 3
beeps. Press and release once more to hear 4 beeps.
This is the loudest option. You can use the rocker
switch to go back through the settings. The beeps
will tell you where you are.
Once you’ve decided which setting you like best, lock
it in by
pressing and HOLDING
the rocker switch for
six seconds, until you hear one long beep
.