Assembly Instructions URA30i
11
4.5 Assembly URA30i to loudspeaker - cross
Figure 4.5 - Assembly URA30i to T30i loudspeaker - cross
Mount positions 1 and 2 (see figure 2.1) to the T30i loudspeaker as shown in figure 4.5. Be
sure to use both screws.
NOTE
Tighten both screws sufficiently. (torque: 20 Nm)
WARNING
General safety instructions for setting up this rigging variant:
Fasten the
URA30i
universal rigging adaptor with a shackle and chain hoist according to the
pin points.
Attach this secondary safety component by
using a second shackle, chain sling or chain hoist
on another pin point.
For the secondary safety component, the respective national electrotechnical regulations apply.
Use a shackle that is designed according to the payload for each system setup.
WARNING
WARNING
NOTE
WARNING