Assembly Instructions SBM12
10
4.4 Assembly SBM12 swivel bracket to trusses or ceiling
For installation purposes, attach the SBM12 swivel bracket to the ceiling by using all three
ø13mm holes located on the crossbar. Make sure that you use suitable fastening material and
that the connections are set firmly and correctly!
WARNING
Figure 4.4 - Assembly SBM12 with M12 to ceiling
Figure 4.3 - Assembly SBM12 to M12 loudspeaker
WARNING
Attach two DHST Doughty Halfcoupler Slimline to the outer ø13mm holes located on the
crossbar of the SBM12 swivel bracket when using the SBM12 swivel bracket on trusses.
Make sure that the connections are set firmly and correctly!
3. Then pull the two retainer (see figure 2.1 - pos.3) up.
4. Then snap the SBM12 swivel bracket into the rigging track of the M12 loudspeaker by
releasing the two retainer again.
WARNING
5. Make sure that all retainers are always completely inserted!
3.
3.
4.
4.
