Operation manual B10
13
4.1 Setup
The B10
loudspeaker is designed for standing operation.
TW AUDiO recommends using only the accessories specified by TW AUDiO for securing and
mounting loudspeakers.
NOTE
Ensure that the loudspeakers are securely attached to prevent personal injury and prop-
erty damage. Secure stacked loudspeakers properly so that they can be tipped by 10° in
any direction without toppling.
WARNING
4. Commissioning
4.2 M20 pole mount flange
For all system components mounted on top of the M20 pole mount flange, observe the res-
pective operating instructions!
Also be sure to observe all of the following warnings:
Make sure that all system structures are located on a firm, level surface and that the surface
can bear the total weight!
WARNING
Make sure that the maximum load of 50 kg / 110 lbs for the M20 pole mount flange is not
exceeded! Figure
2.1 – Item
3
.
WARNING
Make sure that no unauthorized persons can access the system structures!
Cordon off the area professionally!
WARNING
The M20 pole mount flange (figure 2.1- item 3) is not designed for side forces once mounted
– do not apply any pressure from the sides.
Make sure that no external forces are applied to the system structures. No objects or per-
sons should lean against the structures, no objects such as balls should be thrown against
them. If pressure is applied on the flange when mounted the loudspeaker may be damaged
by falling over.
WARNING
Summary of Contents for B10A
Page 1: ...Operation manual B10...
