Sayfa
6
/
12
there is a certain opening between the wall and the device, it is useful to close it as in the figure
below so that the air flow is not bypassed.
If the device is located in a hollow environment:
To prevent fan air bypass, the air diverter must be adjusted to the level of the pit. Or the device
should be raised with an additional chassis.
If an air diverter is to be used, its length should
not exceed the diameter of the fan.
Distance A must be greater than W/2
H distance must be greater than A*0.7
If an upgrade was made with a chassis;
Dimension A must be greater than W/2
