6
Priming the Atomizer Head and
Filling the Tank:
Note: It is important to “prime”
a new atomizer head before first
use. Failure to do so can cause the
atomizer coil to overheat, leading to
an unpleasant taste and sometimes
irreversible damage to the atomizer
head.
Remove the tank from the arc Slim
by unscrewing at the atomizer
base. Turn the tank upside down,
then remove the atomizer base
from the glass section of the tank
by unscrewing it. Prime the fitted
atomizer head by dripping a few
drops of E-liquid into its central hole.
After priming, fill the tank through
one of the apertures either side of
the central air hole. Do not allow fluid
to enter the central air hole. Refit
the atomizer base, then screw the
assembled tank back onto the arc
Slim battery.
Using Your arc Slim Kit
