TW Gema OptiSelect, Operating & Parts Manual

Page: 26 / 49

V 07/07
24
•
Start-up and operation OptiSelect manual powder gun
2.2 2.3
Gun Aux Power IN Air supply IN
2.1
6 - 10 bar
87 - 145 PSI
1.5 1.4 1.3 1.2
Connecting guide - overview
Function check
1. Turn on the gun control unit
2. Press the desired application key (Preset or Program Mode)
on the control unit (see gun control unit operating instruc-
tions)
3. Pick the gun up and point it at a grounded object, at a dis-
tance of approx. 20 cm
4. Press the powder gun trigger
-
The display for current and high voltage on the control
unit shows the actual value. The high voltage is present
in the OptiSelect gun, and the LED illuminates
-
The high voltage can be set with the corresponding keys
(See also the control unit operating instructions)
5. Select the powder output and total air volume
-
The display indicates the powder output in % and total
air volume in m³/h
6. Press the corresponding key for the rinsing air on the control
unit (according to the nozzle used)
7. Check the remote control by pressing the + or - key on the
back of the powder gun, and the modified powder output
value is displayed on the control unit. By simultaneous press-
ing of the
+ and - key, the application modes can be changed
on the control unit
When all the checks are positive, the gun is ready for operation.
Filter unit
Injector
Gun
Fluidizing air