Introduction
Thank you for deciding to use a high-quality product “MADE IN GERMANY” manufactured
by TW AUDiO.
VERA10 is a vertical line array speaker system. It has been designed for events where
providing the highest possible quality is important in many regards. An understated
appearance, innovative output/size/weight ratio, as well as straightforward and fast
assembly characterise this speaker system.
Please read the operating instructions attentively before using the device for the first time,
and keep the instructions somewhere safe.
If you rent your products to third parties, explain the safety-relevant operating processes to
them and give these operating instructions. If you should require more copies of these
operating instructions, you can request them from TW AUDiO free-of-charge at any time.
Notes in the operating instructions
Please observe the notes listed in these operating instructions, which are indicated as
follows:
This symbol, when used in combination with the signal word “Warning”, indicates
a potentially dangerous situation. Non-observance of this safety warning could result
in death or severe injuries.
This symbol, when used in combination with the signal word “Caution”, indicates
a potentially dangerous situation. Non-observance of this safety warning could result
in moderately severe to light injuries.
This symbol, when used in combination with the signal word “Note”, indicates
a potentially dangerous situation. Non-observance of this safety warning could result
in damage to the product.
The symbol, when used in combination with the signal word “Tip”, indicates additional
information or notes about field-tested, simplified handling of TW AUDiO products.
The symbol indicates a dangerous situation for persons with pacemakers.
Non-observance of this safety warning could result in death or severe injuries.
Summary of Contents for VERA10
Page 1: ...VERA10 RIGGING MANUAL ...
