Operation manual T24N
13
1. Place the T24N loudspeaker on its back, with the speaker grill facing up. Make sure to
place the speaker on a clean, non-slippery surface.
2. To remove the front grill, a
hexalobular key with the size of TX25
is required. Remove all
front grill mounting screws from the top and bottom of the loudspeaker (4 pieces).
Lift the
front grill of the loudspeaker away. Secure the speaker against lifting and slipping if neces-
sary with a second person.
3. Pull the horn with the compression driver up and out of the speaker cabinet.
4. Insert the horn funnel to be changed into the horn foot. To do this, press the horn funnel
until it snaps back into the horn foot with the click mechanism. Then check the tightness
of the horn funnel in the horn foot.
5. Attach the grill using the screws provided.
Please note that when operating the T24N loudspeaker without front grill, the HF horn must
additionally be secured against falling out! (Sticking)
4.2.2 Changing the HF horn
Figure 4.2.2 - changing the HF horn
WARNING
Summary of Contents for T24N
Page 1: ...Operation manual T24N...
