Network Connection
5
MENU
IPC
Network Cable
Network Cable
Switch
Router
Computer
●
Access Through IP
-
Tool
Here we take accessing IP camera via LAN for example.
①
Make sure that the camera and the PC are well connected to the
LAN.
②
Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Device
Network
Search
Immediate
Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226
. 201
255
.
255
.
255
. 0
192
.
168
.
226
. 1
i
Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3
Local IP Address:192
.
168
.
1
.
4
Subnet Mask:255
.
255
.
255
.
0 Gateway: 192
.
168
.
1
.
1
DNS
：
210
.
21
.
196
.
6
Device Name Device Type
IP Address
Http Port
Data Port
Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according
to the practical situation.
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
1
. 201
255
.
255
.
255
. 0
192
.
168
.
1
. 1
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So
the
IP address of the camera shall be changed to 192.168.1.X. After
modification, please enter the password of the administrator and click
“Modify” button to modify the setting.
The default password of the administrator is “
123456
”.
④
Double-click the IP address to open up the web browser or
manually enter the modified IP address in the address bar of your
browser. Then follow directions to download and install the plugin if
it is the first time for you to log in.
the user name and password in the login interface.
The default username is
admin
; the default password is
123456
.
⑤
Enter
450043001289 A0
Mounting Base
Insert
a
micro
SD
card
④
Bracket adjustment. Before adjustment, preview the image of the
camera on a monitor (See the left figure of step
⑤
) and then loosen the
fixed screws to adjust the view angle of the camera. After that, tighten
the fixed screws.
64.6mm
64.6mm
∅
5
②
Route the cables and connect the relevant cables.
③
Fasten the mounting base to the wall with the screws provided.
Fixed
Screws
Pan
360°
Tilt
90°
Rotate
360°
Type A: Motorized zoom camera
Type B: Manual zoom camera
Zoom
Zoom+ Zoom-
Monitor
Focus
⑥
screws. (
)
Install the cover back to the camera and fix it
with the
firmly
Note that the cover should not be installed unevenly.
Please make sure that the wall or ceiling is strong enough to
withstand 3 times the weight of the camera. Please install the camera
in the dry environment. You'd better install back the cover
of the camera less than 4 hours after removing it.
①
Drill the screw holes and the cable hole (if you want to route
through the ceiling) on the wall or ceiling according to the drill
template.
Cover
⑤
and then insert a micro SD card. After that, adjust Zoom or Focus
to obtain an optimum image. Press the T or W button for Type A;
adjust the Focus and Zoom screws for Type B. Before adjustment,
view the image of the camera on a monitor.
Open the cover of the camera as shown in the following figure
