Network Connection
5
MENU
IPC
Network Cable
Network Cable
Switch
Router
Computer
●
Access the camera through IP
-
Tool
①
Make sure that the camera and the PC are well connected via LAN.
②
Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Device
Network
Search
Immediate
Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226
. 201
255
.
255
.
255
. 0
192
.
168
.
226
. 1
i
Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3
Local IP Address:192
.
168
.
1
.
4
Subnet Mask:255
.
255
.
255
.
0 Gateway: 192
.
168
.
1
.
1
DNS
：
210
.
21
.
196
.
6
Device Name Device Type
IP Address
Http Port
Data Port
Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
1
. 201
255
.
255
.
255
. 0
192
.
168
.
1
. 1
Subnet Mask
Gateway
For example, the IP address of your computer is 192.168.1.4. So
the
IP address of the camera shall be changed to 192.168.1.X and the
gateway shall be changed to 192.168.1.1. After modification, please
enter the password of the administrator and click “Modify” button to
modify the settings.
The default password of the administrator is “
123456
”.
④
Double-click the camera listed in the IP-Tool or manually enter the
IP address in the address bar of the web browser to connect IP-CAM.
Then follow directions to download and install the plugin.
⑤
Enter the username and password in the login interface.
450043001279 A0
④
Bracket adjustment. Before adjustment, preview the image of the
camera on a monitor and then loosen the fixed ring to adjust the view
angle of the camera.
⑤
After that, adjust Zoom or Focus to obtain an optimum image ( If
the camera is fixed or motorized lens, please skip this step). Before
adjustment, preview the image of the camera on a monitor.
Open the cover of the camera and then insert a micro SD card.
⑥
Install the cover back to the camera and fix it firmly with the
screws. (Note that the cover should not be installed unevenly.)
90° Tilt
360°
Rotation
360° Pan
Focus
Zoom
②
Route and connect the cables .
③
Secure the mounting base with camera to the wall with the screws
provided.
∅
4.6
48.08mm
48.08mm
③
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according
to the practical situation.
The default username is
admin
; the default password is
123456
.
Fixed Ring
Insert a micro
SD card
Cover
Rubber plug
