NVMS Storage Server User Manual
7
3.8
Upgrade
You can upgrade the storage server when there is a new software version. Get the upgrade software
from you dealer; click System Maintenance
Device Upgrade to go to the interface as shown blow.
Click “Browse” button to select the upgrade file and then click “Upgrade” button to start upgrading.
3.9
Device Reboot
Click System Maintenance
Device Reboot to go to the interface as shown blow.
Click “Device Reboot” to reboot the device.
4
Q&A
Q1. When the storage server is being started it shows “A discovery error has occurred, please
power cycle the system and all the enclosures attached to this system”.
A1. It indicates that the RAID card could not finish searching in 120 seconds. The system’s SAS
cable may be wrong connected. Please check the cable connection and repair the problems. Then
restart the system later.
Q2. It takes a very long time to rebuild the RAID.
A2. RAID rebuilding time depends on RAID size and the rebuilding process may take more than ten
hours. Recording and playback will not be affected when rebuilding.
Q3. How to replace the abnormal disks in the RAID?
A4. The corresponding disk status indicator will turn red in the disk RAID interface if the disk in the
