44
3. Turn the adjuster nut at bottom side (1) in the slot
marked as “I” in clockwise direction for reducing
the free play or in anti-clock wise direction for
increasing the free play.
4. After obtaining the necessary free play at the
lever end, inspect for the clearance between
the bullet (3) and slot end (4) marked as “S” as
shown in figure.
5. If any clearance is found then turn the top side
adjuster nut (2) at slot marked as “S” in clockwise
direction until there is no clearance between the
bullet (3) and slot top (4).
6. After adjusting the nut top, If any clearance is
observed in between the bullet bottom (5) and
slot bottom (6) marked as “I” as shown, then
turn the adjuster nut (2) in anti-clockwise until the
clearance is closed.
7. Once again check and confirm the brake play at
the lever end.
2
1
Clearance
Clearance
4
2
1
Clearance
Clearance
4
3
3
S
I
S
I
