2.2 Inside the paper cover
Paper-end sensor
(PE sensor)
Auto cutter
Platen
Button to change paper
near-end sensor
Manual cutter
Print head (thermal) Paper thickness
selection lever
Paper near-end sensor
(PNE sensor)
Platen
Feeds the paper.
Paper near-end sensor (PNE sensor)
Detects when the paper is near the end of the roll. Adjust the position of the
sensor to determine when it detects the end of the paper is near.
Button to change paper near-end sensor
Change the position of the paper near-end sensor to match the paper being
used.
Refer to 3.7 Adjusting the Paper Near-end Sensor
Manual cutter
For cutting the paper manually when printing is finished.
Auto cutter
Automatically cuts the paper when printing is finished.
Refer to 5.3 Manual Setting of Memory Switches
Print head (thermal)
Prints characters and graphic data on paper (paper rolls).
Paper end sensor (PE sensor)
Detects when there is no paper. Printing stops when this sensor detects there
is no paper.
— 14 —