or phone?
S1
Make sure the scanner turns on and works normally.
S2
Determine whether the scanner and the terminal device are
under good connection. The blue colored light on scanner is off pls.
go to S3. It is on pls. go to S4.
S3
The scanner and the terminal device do not connect
successfully, please go to 3.1 Bluetooth Mode setting or 3.2 2.4G
Mode setting. Confirm good connection and then scan the barcode
to transmit.
S4
Please check if there is other terminal device in the
communication range. If the scanner connects to other terminal
device, please disconnect and go to 3.1 or 3.2 to connect with this
terminal device.
9.4 How to do if computer or mobile phone cannot
find the Bluetooth scanner?
First pls. check if the Bluetooth of the terminal device works
normally. If yes, pls. go to 3.1 Bluetooth Mode setting.
9.5 Bluetooth scanner has been connected with the
phone or computer through Bluetooth before, how to
pair with the phone or computer again?
If the scanner does not connect with other devices after
disconnecting with this terminal device, the scanner will connect
with the terminal device automatically while both of them turn on.
If the scanner has connected with other devices, or the automatic
connection with this device fails, pls. delete the paired Bluetooth
(“
Barcode Scanner HID
”
)
on the terminal device and go to 3.1
Bluetooth Mode setting.
9.6 The Bluetooth of the scanner connects with
device-A first, then connects with device-B, and then
disconnects with device-B, will it connect with
device-A automatically?
It will not connect with device-A automatically. You need
delete the paired Bluetooth (“
Barcode Scanner HID
”) on the A
device and go to 3.1 Bluetooth Mode setting.
9.7 The scanner connects to the terminal device, how
to connect with another terminal device?
9.8 Will it reconnects automatically after turning it
off?
2.4G mode: When Dongle connects to the terminal device
and the scanner has not established a new connection with other
terminal devices, the scanner will connect automatically after
re-power on.
Bluetooth mode: The terminal device establishes a
connection through Bluetooth Mode before the scanner turns off.
After shutting down, there is no deletion on the Bluetooth list of
the terminal device, the scanner will connect automatically after
re-power on.
If the connection is not successful, go to 3.1 or 3.2.
9.9 Why Red light does not shine when charging?
Please confirm the power supply device turns on, let the
scanner power off and charge again.
10. Technical supporting
If this manual doesn’t solve your problem, please contact
your supplier.
E Waste Management
Instructions: Do's and Dont's
Do’s
Always drop your used electronic products & Accessories/Consumables
/spares/ batteries and packaging materials after the end of their life at the
nearest collection point.
Separate the packaging material according to responsible waste disposal
options and sorting for recycling.
Keep the product in isolated area, after it becomes non-functional
un-repairable so as to prevent its accidental breakage
Dont's
The product is not meant for re-sale of any unauthorized agencies/scrap
dealers
Never dump e-waste in garbage bins
Do not dispose off your product in at municipal waste bins
Do not throw used batteries into household waste.
Waste Collection
TVS-E has put in place a pan India collection mechanism to assist its
customers in depositing their e-waste as per the new E-waste (Management)
Rules, 2016 effective from 1st October, 2016.
You can deposit the WEEE at the nearest Collection Point. Details of the
location of Collection Points and Collection Centres information are also
available on this website.
You can dispose of a used TVS-E product very easily and responsibly.
Simply call at 1800425 4528 and drop it at your nearest Collection points .
All these E-waste will be consolidated and forwarded to Tumkur Collection
point for final disposal through Authorized E-waste Recycler
TVS-E assures all its customers that all its e-waste collected under these
Rules will be recycled/ disposed of by an authorized e-waste Recycler as
per the E-waste Management Rules, 2016.
TVS-E Commitment:
TVS-E is committed to environmentally sound management of e-waste
taking all steps required to ensure that e- waste are managed in a manner
which shall protect health and environment against any adverse effects
which may result from hazardous substance contained in such wastes.
TVS-E assures that the covered products do not contain lead, mercury,
cadmium, hexavalent chromium, poly- brominated biphenyls or
poly-brominated di-phenyl ethers above a specified threshold. The
threshold for cadmium is 0.01% by weight in homoge- neous material, for
all other substances, the threshold is 0.1% by weigh t in homogeneous
material.
Connect A in 2.4G mode
Pull the dongle out of A
Scan required barcode
Plug dongle into B or
open B’s Bluetooth
connect B
connect A in Bluetooth mode
Close A’s Bluetooth
