Page
4
Advanced
setup
The
Digital
TV
Recorder
also
gives
you
the
option
to
set
up
the
internet
connection
manually.
We
recommend
that
you
do
NOT
use
the
Advanced
Setup
features
unless
you
are
very
familiar
with
internet
setup
and
have
special
requirements
for
your
digital
TV
Recorder
to
operate
on
your
network.
To
use
this
feature
select
Network
settings
(in
Network
Settings,
from
the
Settings
Menu)
and
select
Manual
Network
Setup.
In
this
function
you
are
able
to
select
wired
or
wireless
connection,
WiFi
encryption,
manual
setup
of
SSID
and
WiFi
Key
as
well
as
scanning
for
available
Wifi
signals.
By
pressing
[YELLOW]
you
are
able
to
configure
your
network
setup
manually.
If
Automatic
is
selected
the
IP
and
other
addresses
are
obtained
via
DHCP,
and
the
MAC
address
of
the
Digital
TV
Recorder
(or
Wifi
adaptor)
is
displayed.
If
Manual
is
selected
then
you
are
able
to
navigate
and
change
the
IP
and
other
addresses
yourself
(this
is
not
recommended
for
non
‐
advanced
users)
to
save
press
[GREEN]
and
[GREEN]
again
to
apply
the
settings
and
test
the
network
connection.
You
are
able
to
test
the
network
connection
at
any
time
using
the
Network
test
option
in
the
Network
Settings
Menu.
Software
Upgrade
It
is
now
possible
to
update
the
software
on
your
Digital
TV
Recorder
using
the
internet
(
connection
required
as
detailed
above
).
This
new
feature
ensures
that
you
keep
up
to
date
with
all
the
latest
improvements
and
features
as
soon
as
they
are
available
with
out
the
need
to
use
your
PC.
Once
the
new
software
is
installed
your
Digital
TV
Recorder
will
periodically
check
for
new
updates
and
install
them.
If
you
prefer
not
to
install
new
software
automatically
then
you
are
able
to
change
this
within
the
General
settings
menu:
1.
Press
[MENU]
then
press
the
[DOWN]
arrows
to
select
“Settings”,
press
[OK].
2.
Select
“General
Settings”,
press
[OK].
3.
Use
the
[UP/DOWN]
arrows
to
select
“Update
Software”
4.
Use
the
[LEFT/RIGHT]
arrows
to
change
the
setting
from
automatically
to
“Prompt”
or
“Off”
press
[BACK]
or
[MENU]
to
exit.
If
“Prompt”
is
selected
then
if
new
software
is
found
you
will
see
a
banner
to
ask
if
you
would
like
to
update
or
not,
and
if
“Off”
is
selected
the
Digital
TV
Recorder
will
never
search
for
new
updates.
We
Recomend
that
you
leave
this
setting
on
Automatically
to
make
sure
you
get
the
latest
features
If
you
wish
to
search
for
updates
yourself
then:
1.
Press
[MENU]
then
press
the
[UP/DOWN]
arrows
to
select
“Service”,
press
[OK].
2.
Use
the
[UP/DOWN]
arrows
to
select
“Internet
Software
Upgrade”,
press
[OK].
The
Digital
TV
Recorder
will
now
search
for
a
newer
update
to
your
curently
installed
version.
The
new
version
number
will
be
shown
and
you
can
choose
to
update
the
Digital
TV
Recorder.
The
new
version
will
then
be
installed,
the
Digital
TV
Recorder
will
reset
and
inform
you
that
the
update
was
sucessful.
