14
Magenta by tvONE
Connecting encoders and decoders in Pathfinder Control
This task is for systems with mult
iple endpoints only. If you’re only
extending a single PC, skip this task and go to Using the on-screen
display on page 15.
1.
Select Layout > List.
2.
For the devices you want to connect, select the box in the Grid
column. If you don’t want to connect a device right now, clear the
box in the Grid column.
3.
Select Layout > Grid.
4.
From Decoders, select a decoder. When the decoder turns green,
select an encoder from Encoders. When the two devices are
connected, they turn blue.
Next steps
Congratulations, your basic network is set up. You can now log on
to and use your Pathfinder network with just the on-screen display.
Read on for information about how users can log on to a PC and
connect to an encoder.
You can also set up more sophisticated features in Pathfinder
Control, such as device groups, Cross-Click, and WindowView.
Read more about setting up extra features in the Pathfinder
Control User Guide. There’s a link at the back
of this guide.
