6
Connect the furnished AC to 12 VDC adapter and gently rotate the connector barrel to
lock in position. Lastly, if tally operation is desired, wire a mating DB-9 plug for the tally
connector and connect it to the monitor. Shorting pins 1 and 6 on the Tally connector will
cause the Tally LEDs at the top of the front panel to illuminate.
4.1
Power Supply Bracket and VESA Mounting Provision
As seen in the illustration below, a bracket is provided that can be affixed to the left, rear
of the monitor to hold the AC Adapter. If desired, attach the bracket and place the AC
adapter in the bracket is such a manner as to prevent physical interference with other
equipment in the rack.
Four (4) pre-drilled and threaded attach points are provided in the center to allow
mounting of the LM-1750HDW directly to a wall or other structure using VESA 100mm
standard mounts available from third party vendors. Please note that the rack ears remain
in place, even when a VESA mount is used. Also, use of a VESA mount may preclude the
use of the AC adapter mounting bracket.
